Tekonsha Prodigy P2 Electric Caravan Brake Controller
Tekonsha Prodigy P2 is one of the most versatile brake controllers on the market. It features digital voltage and reverses polarity protection which is the cause of most installation failures.
- Reverse battery protection for both vehicle and breakaway
- Designed to work with electric over hydraulic brake systems
- Numerous mounting options – including 360-degree vertical rotation
- Digital display depicts voltage delivery to Trailer during braking
- No level adjustment is necessary – it adjusts itself to varying terrain as you drive
- Great for backing into tough spots! Works proportionally in reverse with the ability to disable when not needed
- Produces stops that are in proportion to a vehicle deceleration rate
- The “Boost” feature gives users the ability to apply more initial trailer braking power when towing heavier trailers
- Continual diagnostics check for proper connection, shorted magnet conditions and much more
- The quick and easy disconnect feature allows a user to remove and store the control when not in use
- Electric trailer brake control for up to 4 braking axles
- Limited lifetime warranty
Setup Process
“I would recommend you start over with your Tekonsha Prodigy P2 Brake Controller and go through the setup process again so that it will be properly set up. A good startup procedure.”
The first step is to connect your Trailer to your tow vehicle. Next, with the engine running, hold the manual lever full to the left and set the power knob to indicate approximately 6.0.
Now you will want to drive your tow vehicle and Trailer on a dry, level, paved surface and fully apply the manual lever if the trailer tyres lock up to turn down the adjustment knob. You will want to repeat the previous step until you set the brakes at a point right before the tyre lock-up. Finally, you will want to use the brake pedal to make a few low-speed stops to check the power level.
More links to brake controllers are listed here
Additional information
Weight | 1 kg |
---|---|
Dimensions | 20 × 13 × 10 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Reviews