60mm Round 2t – 3t Hydraulic Disc Braked Axle
60mm Round 2t – 3t hydraulic Disc Braked Axle is suitable as a single braked axle on-road or as a part of a tandem setup.
2t hydraulic setups are rated to a maximum of 2.25t on the road. Tandem configurations if this axle assembly is 4.5t.
Disc Brake Axle Components
- 60mm Round Axle
- Axle Collar
- Hydraulic Caliper Anchor Plate
- Hydraulic Calipers
- Dacromet disc rotor
- Bearings
2t Japanese Marine Bearing Kit
- Inner ID 50mm, OD 89.96mm – HR30210
- Outer ID 31.75mm, OD 61.95mm – 15123/15245
- Seal ID 60.3mm, OD 89.96mm
- Dust Cap OD 63.5mm – CM498
3t Japanese Marine Bearing Kit
- Inner ID 50mm, OD 89.96mm – HR30210
- Outer ID 31.75mm, OD 61.95mm – LM29749
- Seal ID 60.3mm, OD 89.96mm
- Dust Cap
Couplemate uses Al-ko or Trojan hydraulic calipers on all marine disc brake axle build.
Galvanised axles can be provided upon request.
Calculating The Correct Axle Measurements
As a result of viewing the video above, calculate the face to face measurement.
- Measure the offset wheel. The wheel offset is the distance between the inside of the hub and the outside of the rubber.
- Add 50 mm to the offset. Alternatively, choose your own distance between the rubber and the chassis.
- Multiply by 2 for both sides. Add your chassis width to the above number.
Still unsure of what measurements to take? Check out this handy guide below:
[P] – Check material specifications. What size and profile is the axle (for example, 45mm Square)
[T] – Overall axle length (tip to tip)
[F] – Hub face to hub face measurement
[A] – Chassis width
[C] – Tyre clearance
[B] – Back offset
[H] – Tyre to chassis
[G] – Axle pad centres
Identifying Bearing Combinations
You will also need to identify your bearing combination which can be done by pulling off a hub and bearings and locating the number laser engraved onto the bearing. You will require both the inner and the outer bearing numbers.
Additional information
Weight | 90 kg |
---|---|
Dimensions | 240 × 60 × 60 cm |
Stud Pattern | 2t Landcruiser 5 Stud – Al-ko, 2t Landcruiser 6 Stud – Al-ko, 3t Landcruiser 5 stud – Al-ko, 3t Landcruiser 6 stud – Al-ko |
Face to Face Length | 1325mm, 1350mm, 1375mm, 1400mm, 1425mm, 1450mm, 1475mm, 1500mm, 1525mm, 1550mm, 1575mm, 1600mm, 1625mm, 1650mm, 1675mm, 1700mm, 1725mm, 1750mm, 1775mm, 1800mm, 1825mm, 1850mm, 1875mm, 1900mm, 1925mm, 1950mm, 1975mm, 2000mm, 2025mm, 2050mm, 2075mm, 2100mm, 2125mm, 2150mm, 2175mm, 2200mm, 2225mm, 2250mm, 2275mm, 2300mm, 2325mm, 2350mm, 2375mm |
Couplemate Trailer Parts –
For those folks asking axle lengths for various wheel and split rim, call Bruce on 0733483822. All the hard answers are at his fingertips.
Couplemate Trailer Parts –
The link holds all of your answers David.
Couplemate Trailer Parts –
or that one 🙂 You just know I have a few.