4 Leaf x 710mm Slipper Spring

Part No: SLIPPER-45-710-4-M Category: Tag:
Part No: SLIPPER-45-710-4-M Category: Tag:

Price

$75.00 Inc.GST

Frequently Bought Together

9/16-inch x 3.5-inch Non-Greasable Shackle Bolt

Shipping

Select delivery location

Couplemate accepts PayPal, Visa and Mastercard.

4 Leaf x 8mm x 710mm Slipper Spring Heavy Duty

8mm x 4 Leaf Slipper springs 45mm wide with 8mm leaf springs are suitable for highway travel, while 60mm springs are suited to high-speed travel and heavier trailer loads.

This spring style has the traditional eye and spring forming a tail that slides in a keeper or hanger welded to the trailer’s chassis.

Denso Tape has corrosion resistance to springs – 50mm x 10mtr

Slipper Spring Specifications

  • 710mm Eye to Tail.
  • 45mm wide x 8mm thick leaves
  • 9/16 inch x 7/8 inch x 45mm bush.
  • Free Camber 150mm
  • Eye to Center Bolt 330mm
  • Hanger Centers 670mm

Leaves of the spring and spring ratings are as follows:-

Pro Tip: It is not uncommon to see Denso tape wrapped around springs on commercial fishers’ trailers. We have witnessed Denso tape on trailer springs last 20 years. However, many buyers prefer to buy Galvanised springs. 

Rated caravan and trailer Slipper springs at 120% of full load for all single, tandem and tri-axle sets.

For example, a tandem trailer weighing 2,000kg x 120@ = 2,400kg

Axles, leaf springs and associated equipment must rate 2,400 kilograms.

Where is the rear hanger located?

Three key factors are essential to correctly locate the tyre on the trailer and correctly install the leaf spring.

  • Locate the spring centre bolt in the centre of the wheel arch.
  • Install the front hanger in a location that centres the spring in the middle of the wheel arch.
  • Lastly, the rear hanger is positioned so that it is halfway along the Slipper section.

The Slipper tail must have enough room in the keeper to allow the spring to compress and rebound safely.

Leaves of the spring and spring ratings are as follows:-

  • 5 Leaf – 675kg each
  • 6 Leaf – 750kg each

Usually, it is common practice to load share using 2 x 40mm Square axles on a multi-axle trailer. Wrong.

Slipper leaf springs do not load share; they do not transfer load across the entire axle configuration.

For example, each wheel in the above case has a loading of 2,000kg / four tyres or 500kg per wheel.

When the wheel is lifted OFF the ground, it is carrying zero kg

The tyre on the ground load is 1,000kg, while the other two wheels have 1,000 kilograms of the remaining load.

The axle with wheels on the ground is carrying 1,500kg.

Although the trailer slipper springs are an excellent low-budget solution, consider shackle or rocker roller springs if your budget allows.

Purchase your 45mm slipper springs below:

Purchase your 45mm shackle springs below:

Here is an excellent trailer parts article on “Why do springs break”.

Additional information

Weight8 kg
Dimensions93 × 15 × 10 cm

Our Service Lifetime Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.

Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.

Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.

60-Day Returns

After 60 years of experience, we know that life has its unpredictable moments.

All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.

You can view our full policy for change-of-mind returns here.

Reviews

    Be the first to review “4 Leaf x 710mm Slipper Spring”

    Your email address will not be published. Required fields are marked *

    High-Quality Trailer Parts

    Couplemate™ Core Range

    Couplemate Trailer Parts.

    About Us

    Contact Info

    Trade & Wholesale

    Australian Made

    Australian Made

    FAQ