$45.00 - $52.93
Couplemate™️ 45mm Square Spring U-Bolt Kits provide a strong and secure connection for trailer, caravan, and camper leaf springs.
✓ Suits 45mm square axles.
✓ Uses galvanised u-bolts and plates (great for boat trailers).
✓ Easily DIY spring and axle maintenance at home with this complete kit.
See technical diagram for u-bolt measurements.
45mm Square Spring U-Bolt Kits | Hot-Dip Galvanised
The Couplemate™ 45mm u-bolt kit for square axles includes Galvanised u-bolts, nylock nuts, and fish plates.
Spring U-Bolt Kits are designed to safely secure leaf springs to trailer and caravan axles. U-bolts are link between your trailer and the road, hence the importance of using u-bolts made from high-quality materials.
If you have a trailer ATM over 1450kg, Couplemate recommends opting for the heavy-duty u-bolt kit instead.
Need new springs? See our range of leaf springs.
This U-Bolt Kit is supplied with:
- 4 x U-Bolts (choose preferred length)
- 8 x Washers
- 8 x Nyloc nuts
- 2 x Fish Plates
- 2 x Axle Pads/Spacers
45mm Square U-Bolt Specifications
U-Bolts are measured on their internal dimensions to ensure proper fit and alignment with the equipment. See our technical diagram for a visual reference.
- Internal U-Bolt Width: 45mm
- Internal U-Bolt Leg Length:
- 100mm (4″)
- 115mm (4.5″)
- 125mm (5″)
- 140mm (5.5″)
- 150mm (6″)
- 165mm (6.5″)
- 175mm (7″)
- Thread: 1/2″ UNF (12.7mm)
- Coating: Traditional hot-dipped galvanised
Couplemate™️ supplies these 45mm square u-bolt kits for leaf spring suspension systems.
Installation (User Guide)
Couplemate™️ 45mm Square U-Bolt Kits are easy for trailer spring maintenance.
- Place U-shaped curve over axle beam.
- Align the centre spring bolt and U-bolt legs with the fish plate holes.
- Secure fish plate to leaf spring through supplied washers and nylock nuts. Tighten nuts to 60Nm with a socket.
Important: Check U-bolts and re-tighten nuts after the first trip and every 250 km thereafter.
Safety Precautions
- Do not re-use nyloc nuts. Nyloc nuts are often less effective after the first use. This is because the nylon material (the key component of a nyloc nut) has already once conformed to the thread profile.
- Do not use a rattle gun to tighten. Rattle guns often tighten u-bolts too fast, too tight, and uneven. This can cause nylon overheat and risks undue wear.
- Ensure the axle has welded axle pads. If not, use the axle pads supplied with the spring U-bolt kit.
See the range of other trailer and towing safety parts.
Similar U-Bolt Kits
Additional information
Weight | 4.9 kg |
---|---|
Dimensions | 25 × 15 × 5 cm |
Internal Length | 100mm, 115mm, 125mm, 140mm, 150mm, 165mm, 175mm |
Internal Width | 45mm |
U-Bolt Shape | Square |
Coating | Galvanised |
Thread | 1/2" UNF |
Reviews