10-inch Commodore Galvanised Disc Rotor

Name: 10-inch Commodore Galvanised Disc Rotor
Brand: Couplemate™ Australia
SKU: DISC-10-SL-Commodore-Gal
Availability: InStock

Part No: DISC-10-SL-Commodore-Gal Category: Disc Hub Rotors Tags: Australian Made, Boat Trailer Parts, Couplemate™ Core

Couplemate Core Range – Single Product Page

Part No: DISC-10-SL-Commodore-Gal Category: Disc Hub Rotors Tags: Australian Made, Boat Trailer Parts, Couplemate™ Core

Price

$95.75 Inc.GST

Shipping

Select delivery location

10-inch Commodore Galvanised Disc Rotor

10-inch Commodore Galvanised Disc Rotor brakes boat trailers up to 1450kg. Galvanised disk rotors are manufactured in Australia by Couplemate.

High-grade steel was the foundation for building this superior galvanised disc rotor. Galvanising is performed in Brisbane.

This disc rotor sets the industry standard for disc-braked axles and is the most popular rotor in our galvanised axle builds.

Disc stud pattern

Commodore 120mm P.C.D.

Galvanised disc rotors suit standard bearings on 39mm Round Axles to 40mm Square axles or SL bearings for 45mm Round Axles and larger.

Effective Braking for Disc Rotors

When our engineers designed this galvanised rotor, we had the choice of leaving the coating on the disc face or removing it.

Removing the coating opened up opportunities for unsightly rusting.

Disc pads perform best on machined surfaces rather than coated surfaces like dacromat, zinc, or galvanised surfaces.

Trailer Bearing Kit required but not included

A larger braked disc rotor is available for 1600kg and 2250kg ratings and suits 5-stud and 6-stud Landcruiser hubs only.

Dacromet Process vs Hot-dip Galvanizing

Dacromet: In the Dacromet treatment process, chromic acid reacts with zinc, aluminium powder, and base metal to form a dense passive film that is highly corrosion-resistant.

Hot dip galvanizing: First, the iron and steel parts are pickled to remove the iron oxide on the surface of the iron and steel parts.

Products are then immersed in molten zinc solution.

Then, through the reaction and diffusion between iron and zinc, zinc alloy coating with good adhesion is coated on the surface of steel products.

The Application of the Dacromet Process and Hot-dip Galvanizing Process is Different

Dacromet is uses

hardware tools,
auto and motorcycle parts,
subway tunnels,
metal parts of light rail,
railway and electrified railway,
metal parts of bridges,
highways,
port machinery, and metal parts in high-heat environments around engines.

Hot dip galvanizing uses

marine industry,
railway,
highway protection,
power towers,
communication towers,
street lamp poles,
substation auxiliary facilities,
and light industry.

Compatible with the following equipment:

Additional information

Weight	9 kg
Dimensions	10 × 30 × 30 cm
Coating	Galvanised
Stud Pattern (PCD)	Commodore (5 x 120mm)
Stud Thread	7/16" UNF – 490200
NSK Bearing #	11949/10, 12749/10, 67048/10, 68149/10
Bearing Profile	Slimline (SL), Holden (LM)

Our Service Lifetime Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.

Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.

Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.

60-Day Returns

After 60 years of experience, we know that life has its unpredictable moments.

All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.

You can view our full policy for change-of-mind returns here.

Reviews

Be the first to review “10-inch Commodore Galvanised Disc Rotor”