2.25t Bearing Dolly – 15123/30210
$118.50
Brand: Couplemate
Made in Australia.
Shipping
2t Bearing Dolly to suit AL-KO hubs with 15123 and 30210 Bearings
2t bearing dolly takes the effort out of changing a new or old caravan and trailer bearings.
Before installing bearings, it is wise to check the bearing journals for signs of wear. A worn journal will cause bearing misalignment and reduce the life of the bearing.
Check for any gap between the inner race backface and the shaft shoulder.
How to install bearing cups
- After the old bearings are removed, and the old grease cleaned out, knock in the outer cup until it is flush with the hub surface.
- Hold the bearing dolly vertically before giving it one smack with a lump hammer. This smack gets the cup started and before the hub journal. You should be able to feel the dolly stabilise on the outer side of the hub journals.
- Hold the dolly vertically and smack it home with the hammer. Once you hear a sound change, the cup has bedded itself on the bottom shoulder, and the job is complete.
- Turn the hub over and do the same procedure on the other side.
- Use the inner bearing dolly to tap in the seal. Gentle tap otherwise the seal will be damaged.
- Ensure the rear seal is square with the hub and apply a little grease before insertion over the axle profile.
Bearing Dolly Specifications:
- Small = 61.9m OD Suit 152123 bearing outer.
- Large = 89.8mm OD Suit 30210 bearing.
Purchase Bearing Dollies here
- 45.2mm Dust Cap Dolly
- 50mm Dust Cap Dolly
- 63mm Dust Cap Dolly
- Bearing Dollys – SL and LM Bearing Cups
Additional information
| Weight | 5 kg |
|---|---|
| Dimensions | 15 × 10 × 10 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Reviews