2.25t x 50mm Square Overlay Axle – Galvanised
Price
$300.00 Inc.GST
Shipping
50mm Square Galvanised 2t Overlay Axle
50mm Square Galvanised Overlay Axle made in Australia to your specifications and comprises of:
- Solid Beam
- 50mm Stub Axle suit 2t bearing kits
- The overlay portion is 50mm
- Weld Rings to suit 12″ Electric Brakes – optional extra.
Suit bearing sizes
- 2t – 3t Inner Japanese Bearing
- Japanese Outer Bearing – 15123
- 2t Caravan Bearing Seal – 64607
- 2t – Parallel Gal Australian Dust Cap
After ordering, we require the following information because we like it right the first time.
- Wheel Backspace
- Outside to Outside Chassis width
All our 50mm overlay 2t axles are built identically with zero variation in camber.
Calculating The Correct Axle Measurements
- Measure the offset wheel. The wheel offset is the distance between the inside of the hub and the outside of the rubber.
- Add 50 mm to the offset. Alternatively, choose your own distance between the rubber and the chassis.
- Multiply by 2 for both sides. Add your chassis width to the above number.
Still unsure of what measurements to take? Check out this handy guide below:
[P] – Check material specifications. What size and profile is the axle (for example, 45mm Square)
[T] – Overall axle length (tip to tip)
[F] – Hub face to hub face measurement
[A] – Chassis width
[C] – Tyre clearance
[B] – Back offset
[H] – Tyre to chassis
[G] – Axle pad centres
Identifying Bearing Combinations
You will also need to identify your bearing combination which can be done by pulling off a hub and bearings and locating the number laser engraved onto the bearing. You will require both the inner and the outer bearing numbers.
Should you require a galvanised fitted overlay axle, no problem just let us know your requirements.
Additional information
| Weight | 45 kg |
|---|---|
| Dimensions | 240 × 60 × 60 cm |
| Beam Size | 50mm Square |
| Axle Style | Overlay |
| Coating | Galvanised |
| Bearing Profile | |
| Axle Type | Bare axles (no hubs) |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Related products
-
60mm Round 2t – 3t Mechanical Disc Braked Axle
$1,685.61 – $1,759.63 Inc.GST Select options This product has multiple variants. The options may be chosen on the product page -
45mm Square Galvanised Axle
$312.00 – $413.00 Inc.GST Options This product has multiple variants. The options may be chosen on the product page -
40mm Square Galvanised Axle
$279.10 – $343.00 Inc.GST Options This product has multiple variants. The options may be chosen on the product page -
45mm Square Overlay Axles – Bare
$308.00 – $365.48 Inc.GST Select options This product has multiple variants. The options may be chosen on the product page
Reviews