7/16-inch Wheel Stud (490200)
$2.75
Shipping
7/16-inch Trailer Wheel Stud
The 7/16-inch Holden wheel stud has a UNF thread and does not include lug nuts or mag wheel nuts.
Wheel studs sold by Couplemate are high tensile.
Yes, however, high tensile steel studs still require checking each morning when travelling. Wear and tear from rough roads has disastrous results as can be seen from the image below.
How do wheel studs become loose?
Firstly, we rarely see loose wheel studs caused by faulty manufacture. It is important to note that all wheel nuts are tightened correctly.
One loose wheel nut often results in all the wheel nuts becoming loose.
Long-distance travel and corrugated road travel mandate checking the tightness of wheel nuts every morning before breaking camp.
Loose Axle U-bolts cause Highway Havoc.
We are also able to supply custom-made 10″ drums and unbraked hubs.
If the wheel stud is not located here, call one of our experts at 0733483822, and we will try to source it for you.
Download our Caravan Wheel Stud Selection Sheet
Is wheel stud sheer typical?
Is wheel stud sheer typical?Yes, worn wheel studs are more common on caravans than trailers.
The left is a simple example of sheer, where the studs can be replaced.
Most reputable caravan and trailer repairers carry wheel studs for common hubs and drums, such as Ford, Landcruiser, and Holden.
In cases where the stud is loose in the hub or drum, the entire part needs replacement.
Hole size is critical for the stud knurl to lock itself into position; therefore, any sign of a loose fit can be expensive.
Tightening the wheel nuts on your spare wheels is also a good idea. It is not uncommon to lose a wheel on rough trips.
Finally, stripping wheel nuts is uncommon; we just do not see it occur with high-tensile equipment. The stud will sheer before a nut will strip its thread.
How can I identify loose wheel nuts?
A very cheap and easy solution to identify loose wheel nuts are plastic wheel nut indicators.
These indicators slide over the wheel nut and provide a positive indication should the nut move.
Purchase wheel nut indicators here.
Early Holden to HT (150mm Hubs)
- 7/16 Inch UNF studs
- 5 Studs, 4.25-inch PCD (107.95mm)
- 63.5mm between adjacent studs
- Short Knurl
- Knurl Diameter 13.78
- Length under Head: 41mm
- Hole Size: 13.5mm
- Knurl Length: 5mm
Holden HQ onwards (150mm Hubs)
- 7/16 Inch UNF studs
- 5 Studs, 4.75″ PCD (120.65mm)
- 70.9mm between adjacent studs
- Short Knurl
- Length under Head: 41mm
- Hole Size: 13.5mm
- Knurl Length: 5mm
Review the Wheel Stud links Below
- 7/16-inch Wheel Stud (490200)
- AL-KO 1/2-inch Wheel Stud (490300)
- AL-KO 1/2-inch Short Industrial Wheel Stud (490301)
- AL-KO 1/2-inch Short Industrial Wheel Stud (490301)
- 1/2-inch Long Industrial Wheel Stud (490302)
- 1/2-inch Dexter Long Wheel Stud (490308)
- M12 Wheel Stud (1.5 TPI) (490300-12)
- 9/16-inch Wheel Stud (490402)
- 9/16-inch Long Knurl Wheel Stud (490401)
- M14 Wheel Stud (490340)
- 5/8″ UNF Short Knurl Stud
Additional information
| Weight | 0.2 kg |
|---|---|
| Dimensions | 4 × 2 × 2 cm |
| Stud Thread | 7/16" UNF – 490200 |
| Stud Length | 41mm |
| Stud Knurl Length | 9mm |
| Stud Knurl Dia | 13.89mm |
| Stud Knurl Hole | 13.5mm |
| Stud Head Thickness | 5.2mm |
| Stud Head Hole Dia | 19.2mm |
| Materials | High Tensile Steel (4140) |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Reviews