Wheel Nut Indicator
$0.85
Shipping
Wheel nut indicators provide clear evidence of loose wheel nuts
How to Measure Wheel Nuts – Holden is 17mm
Wheel nut indicators quickly identify nuts loose on their studs during transit. Indicators identify nuts that have loosened out of alignment.
Indicators are essential caravanning equipment because wheel nuts work loose on rough roads and require daily checking.
Other uses for nut indicators include
- Vibratory Conveyors.
- Feeders.
- Vibratory & Rotary Shakeouts.
- Screening Solutions for Mining & Aggregate.
- Grinding and Attrition Machinery.
- Underground Mining Machinery.
Driving caravans and campers over rough roads mandates maintenance checks every morning before the day’s adventures commence.
How to calculate the rim and tyre PCD link. Did you know that wheel studs are high-tensile steel and precision equipment?
The knurl is important; otherwise, wheel studs spin during tightening.
Furthermore, wheel studs cannot be welded.
Once the wheel stud has commenced spinning, the hole has been oversized.
The drum now requires replacement. It is not to insert new wheel studs into old stud holes.
If a replacement is necessary, then we recommend a drop of red locktite.
Specifications and Sizes
- 3/8″ indicators fit nuts that measure 3/8″ across the flats with a vernier caliper.
- 7/16″ Suit all Holden and 4 stud hubs – 19mm across the flat edge of the nut.
High-density polypropylene is used in the manufacture of nut indicators.
Severed Wheel Nuts
Severed wheels studs are not caused by faulty manufacture or bad driving style. When rough roads loosen wheel nuts, the wheel rim acts as a hammer on the high-tensile studs, causing them to break.
It is common for wheel nuts to work their way loose and require tightening immediately.
A simple remedy is to check the nuts every morning or, better still, insert wheel indicator tags for increased safety.
These tags quickly identify even a slight loosening of the wheel nuts.
Once the identification process is made, the simple remedy is to tighten the loose nuts.
Wheel tag indicators provide an easy visual inspection method to ensure fleet safety.
How to install wheel nut indicators
- Insert the tab over the nut, ensuring the pointed tab is touching the right-hand side against the hub.
- A loosened nut will move the tab in an anti-clockwise direction.
- Re-tighten the wheel nut immediately and replace the tab in the correct position.
Additional information
| Weight | 0.01 kg |
|---|---|
| Dimensions | 0.3 × 2 × 3 cm |
| Select Size | 17mm Hex, 19mm Hex, 21mm Hex |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Reviews