60mm Round 2t – 3t Hydraulic Disc Braked Axle
60mm Round 2t – 3t hydraulic Disc Braked Axle is suitable as a single braked axle on-road or as a part of a tandem setup.
2t hydraulic setups are rated to a maximum of 2.25t on the road. Tandem configurations if this axle assembly is 4.5t.
Disc Brake Axle Components
- 60mm Round Axle
- Axle Collar
- Hydraulic Caliper Anchor Plate
- Hydraulic Calipers
- Dacromet disc rotor
- Bearings
2t Japanese Marine Bearing Kit
- Inner ID 50mm, OD 89.96mm – HR30210
- Outer ID 31.75mm, OD 61.95mm – 15123/15245
- Seal ID 60.3mm, OD 89.96mm
- Dust Cap OD 63.5mm – CM498
3t Japanese Marine Bearing Kit
- Inner ID 50mm, OD 89.96mm – HR30210
- Outer ID 31.75mm, OD 61.95mm – LM29749
- Seal ID 60.3mm, OD 89.96mm
- Dust Cap
Couplemate uses Al-ko or Trojan hydraulic calipers on all marine disc brake axle build.
Galvanised axles can be provided upon request.
Calculating The Correct Axle Measurements
As a result of viewing the video above, calculate the face to face measurement.
- Measure the offset wheel. The wheel offset is the distance between the inside of the hub and the outside of the rubber.
- Add 50 mm to the offset. Alternatively, choose your own distance between the rubber and the chassis.
- Multiply by 2 for both sides. Add your chassis width to the above number.
Still unsure of what measurements to take? Check out this handy guide below:
[P] – Check material specifications. What size and profile is the axle (for example, 45mm Square)
[T] – Overall axle length (tip to tip)
[F] – Hub face to hub face measurement
[A] – Chassis width
[C] – Tyre clearance
[B] – Back offset
[H] – Tyre to chassis
[G] – Axle pad centres
Identifying Bearing Combinations
You will also need to identify your bearing combination which can be done by pulling off a hub and bearings and locating the number laser engraved onto the bearing. You will require both the inner and the outer bearing numbers.
Additional information
Weight | 80 kg |
---|---|
Dimensions | 240 × 60 × 60 cm |
Stud Pattern | 2t Landcruiser 5 Stud – Al-ko, 2t Landcruiser 6 Stud – Al-ko, 3t Landcruiser 5 stud, 3t Landcruiser 6 stud |
Beam Size | 60mm Round |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Couplemate Trailer Parts –
For those folks asking axle lengths for various wheel and split rim, call Bruce on 0733483822. All the hard answers are at his fingertips.
Couplemate Trailer Parts –
The link holds all of your answers David.
Couplemate Trailer Parts –
or that one 🙂 You just know I have a few.