Galvanised Spare Wheel Carrier Rescue Kit
Spare wheel carrier kits have galvanised stub axles to suit caravans and boat trailers. The kit bolts onto 75mm and 100mm drawbars.
This product is Australian-made at our Wynnum warehouse.
Product Specifications
Tube Length: 400mm
It is suitable for 75mm and 100mm drawbars. On boat trailers, the spare wheel holder mounts near the trailer winch post.
Bearing Profiles:
Install greased bearings inside the light hub or disc rotor on the drawbar, which are ready for use in case of a breakdown. Note that these items are supplied without grease.
Available sizes are listed below
Included in this Kit:
- 2x Galvanised U-bolts (incl. hardware)
- 50mm x 50mm Galvanised RHS (vertical holder)
- 1 x backing plate
- 1 x 39mm Round Galvanised Axle Assembly
Holden LM Bearing Kit
- Inner ID 31.75mm, OD 59.10mm
- Outer ID 19.05mm, OD 45.20mm
- Seal ID 37.5mm, OD 59.10mm
- Dust Cap 45.20mm
Ford Slimline Kit
- Inner ID 35.00mm, OD 59.10mm (68149)
- Outer ID 22.00mm, OD 45.20mm (12749)
- Seal ID 43.9mm, OD 59.10mm (492015)
- Grease Cap 45.20mm (CM497)
1.6t Dexter Bearing Kit (3500lbs)
- Inner ID 35.00mm, OD 59.97mm – LM68149/111
- Outer ID 27.00mm, OD 50.29mm – LM44649/10
- Seal ID 44mm, OD 65.22mm – GS-1719DL
- Grease Cap 1.98 inch
2t Alko Bearing Profile (380mm Long)
- Inner ID 50mm, OD 89.96mm – HR30210
- Outer ID 31.75mm, OD 61.95mm – 15123/15245
- Seal ID 60.3mm, OD 89.96mm – 64607
- Dust Cap OD 63mm – DC2
Additional information
Weight | 5.1 kg |
---|---|
Dimensions | 30 × 20 × 10 cm |
Bearing Type | Holden LM, Ford Slimline, Parallel, 1.6t Dexter (3500lbs), 2t Al-ko |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Reviews