2t x 5 Stud Landcruiser 12-inch Galvanised Disc Rotor
Price
$280.00 Inc.GST
The Couplemate™ 12-inch Galvanised Rotor is available in a 6S Landcruiser stud pattern to suit 2.0t boat trailers and marine axles.
✓ Machined disc surface to maximise braking.
✓ Hot dipper Galvanised to provide superior rust protection.
✓ High-quality hub made from cast iron featuring metric studs to suit mags and steelies.
It is officially licensed with the Australia Made Campaign.
Shipping
12-inch Galvanised Disc Rotor | Suits 5S Landcruiser Trailer Wheels (2t)
The Couplemate™ hot-dipped galvanised 12-inch integral rotor suits the 5S Landcruiser PCD (150mm) and Australian 2t bearings.
Couplemate Trailer Parts manufactures 2t galvanised disc rotors from high-quality cast iron in Australia.
N.B. This disc will suit Australian-style calipers (15mm pad spacing) such as AL-KO and Trojan.
Disc Specifications
Diameter: 300mm (12-inch)
Coating: Hot Dipped Galvanised
Stud Pattern: 5S Landcruiser
Wheel Studs: 5 x M14
Wheel Nuts: 5 x M14 (Included)
Thread: 14mm
Pitch: 1.5
Trailer Wheel Requirements
- Minimum Wheel Bore: 105mm
- PCD: 5 x 150mm (i.e. 5S Landcruiser)
Bearing Requirements (not supplied)
- Inner Bearing: 30210J
- Outer Bearing:15123/245
Purchase bearings here: Japanese NSK Marine 2.25t Bearing Kit
What are the Benefits of a Galvanised Disc Rotor?
Couplemate™ engineers increased braking capacity by removing the galvanised coating on the disc surfaces.
Coatings like dacroment and zinc on braking surfaces reduce braking efficiency.
Superior Australian-Made Quality
Couplemate™ boat disc rotor hubs are made in Australia: designed, cast, machined, and hot dipped domestically.
It provides superior strength and durability. Reliable disc brakes are important for road safety.
2t Disc Rotor Installation & Safety Guidelines
Please check the condition of your boat trailer axle and trailer bearings before use. A wear-free axle bearing journal and a fresh set of bearings will maximise your rotor efficiency and lifespan.
Couplemate™ strongly advises using Japanese tapered roller bearings with marine-grade grease (not clay-based). Moreover, you’ll want to ensure your disc brake pads are in good condition.
Ensure wheel nuts are tight upon installation. Check and re-tightened wheel nuts and u-bolts after the first trip and every 5000 km/6 months after that.
Dacromet Process vs Hot-dip Galvanizing
Dacromet: In the Dacromet treatment process, chromic acid reacts with zinc, aluminium powder, and base metal to form a dense passive film that is highly corrosion-resistant.
Hot dip galvanizing: First, the iron and steel parts are pickled to remove the iron oxide on the surface of the iron and steel parts.
Products are then immersed in molten zinc solution.
Then, through the reaction and diffusion between iron and zinc, zinc alloy coating with good adhesion is coated on the surface of steel products.
The Application of the Dacromet Process and Hot-dip Galvanizing Process is Different
Dacromet is uses
- hardware tools,
- auto and motorcycle parts,
- subway tunnels,
- metal parts of light rail,
- railway and electrified railway,
- metal parts of bridges,
- highways,
- port machinery, and metal parts in high-heat environments around engines.
Hot dip galvanizing uses
- marine industry,
- railway,
- highway protection,
- power towers,
- communication towers,
- street lamp poles,
- substation auxiliary facilities,
- and light industry.
Additional information
| Weight | 15 kg |
|---|---|
| Dimensions | 35 × 35 × 20 cm |
| Hub Boss Diameter | 105mm |
| Hub Size | 12-inch |
| NSK Bearing # | 15123/245, 30210J |
| Materials | Cast Iron (AS1830) |
| Stud Pattern | 5s Landcruiser (5 x 150mm) |
| Stud Type | M14x1.5, 9/16" UNF |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Reviews