50mm Square Galvanised Lazy Axle
Price
$682.50 – $1,131.50 Inc.GST
Shipping
50mm Square Galvanised Lazy Axle
50mm square galvanised lazy or unbraked axle is used on tandem trailers and has a maximum weight rating of 1600kg in a parallel configuration.
Tandem axles under 2,000kg require brakes on one axle. Tandem trailers over 2t require electric brakes on all axles. In the case of braking requirements for boat trailers over 2t, electrically activated hydraulic brakes are acceptable.
Important: Axle pads locate and centre the axle of the trailer springs. Please advise the outside chassis width of your trailer. We are then able to weld axle pads into the correct position. This service is not included in the price as some customers do not require this service.
Axles and hubs are Australian made by Couplemate and Galvanised in Brisbane; as a result, you are purchasing the best equipment money can buy.
Seal Shoulder
The seal shoulder is an essential factor when selecting stub axles.
- Electric stub axles have a seal that should set back 128mm for standard slimline bearings and 140mm for parallel bearings
- Marine stub axles have a rear shoulder of 115mm to accommodate a marine seal
- Parallel Marine is 125mm to the rear shoulder
- 2t Electric is 180mm to the weld ring shoulder
- 2t Marine is 141mm to the back shoulder
Please measure the back shoulder before ordering.
Why should I use Dome Nuts?
I had a problem adjusting my bearings for the trip home from the Hawkesbury River.
No problem removing three wheels, however, the fourth wheel refused to move this wheel nut
No amount of leverage would unfreeze the rusty wheel nut.
The wheel nut protruded past the nut and has become rusted.
One of the guests in the caravan park produced a Hilti rattle gun. To my surprise, the rattle gun removed the rusty wheel nut immediately.
Galvanised Unbraked Axle kit comprises:
- 50mm Square Galvanised Axle
- 2 x Galvanised Lazy Hubs
- Nuts to suit the stud pattern
- Japanese bearings
Our technicians insert NSK bearings into all Galvanised hubs.
Available Stud Patterns
- Ford – Slimline
- HT Holden – Slimline
- HQ Holden – Slimline
- 6 Stud Landcruiser – Slimline
- 5 Stud Landcruiser – Slimline
- 2t x 6 Stud
- 2t x 5 stud
Trailer Axle Alignment
Installing a new axle is tricky for most installers.
Measure the distance from the chassis rail to the back of the hub on both sides. Once correctly aligned, install the u-bolts over the axle.
Alternatively, measure the chassis width of the trailer. This measurement allows us to weld the axle pads onto the axle before delivery. As a result of the installed axle pads, the axle will auto-locate over the spring centre pins.
In seconds, the axle is perfectly aligned and ready for the u-bolt kit to be installed.
Finally, the links below contained a variety of stub axles we manufacture
Additional information
| Weight | 70 kg |
|---|---|
| Dimensions | 240 × 60 × 60 cm |
| Stud Pattern (PCD) | 5 Stud Landcruiser (5 x 150mm), 6 Stud Landcruiser (6 x 139.7mm), Ford (5 x 114.3mm), Holden HQ (5 x 120.65mm), Holden HT (5 x 107.95mm) |
| Beam Size | 50mm Square |
| Bearing Profile |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Related products
-
45mm Square Overlay Axles – Bare
$308.00 – $365.48 Inc.GST Select options This product has multiple variants. The options may be chosen on the product page -
39mm Round Unbraked Lazy Axle
$270.00 Inc.GST Select options This product has multiple variants. The options may be chosen on the product page -
45mm Square Galvanised Hydraulic Disc Brake Axle
$1,108.00 – $1,478.00 Inc.GST Select options This product has multiple variants. The options may be chosen on the product page -
45mm Square Parallel Axle
$177.00 – $255.00 Inc.GST Options This product has multiple variants. The options may be chosen on the product page
Reviews