1-inch Thrust Washer (Active Fabrication PLL)
$8.38
Shipping
1-inch Axle Thrust Washer
1-inch axle thrust washer designed by Active Fabrications to fit Al-ko and Couplemate 10 inch parallel drums onto their axles.
For example, an Al-ko drum will not fit correctly on an AF-turned axle unless you are use a thrust washer.
The bearings cannot be pre-loaded or adjusted without this washer.
Have you tighten the axle as far as you can and the hub is still not tight?
The only thing you can do is call us and get a few of these specially machined washers.
Your trailer, caravan or camper will not go far if you have not found this solution.
Finally, other associated parts can be found at these links.
- 5mm Split Pin
- 12TPI Axle Nut
- 14TPI Axle Nut – Alko
- 1 inch Standard Washer
Additional information
| Weight | 0.2 kg |
|---|---|
| Dimensions | 3 × 3 × 1 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Related products
-
Dexter Axle E-Z Lube Retainer Kit
$22.50 – $65.80 Options This product has multiple variants. The options may be chosen on the product page -
M16 Flat Washer- Galvanised – 701037
$0.50 Add to cart -
Castellated Axle Nuts
$3.31 – $50.50 Options This product has multiple variants. The options may be chosen on the product page -
Nylock Nuts
$0.38 – $1.75 Options This product has multiple variants. The options may be chosen on the product page
Reviews