4WD Swing Away Rear Spare Wheel Carrier Bracket
The 40mm square swing-away rear 4WD spare wheel carrier bracket is ideal for carrying spare tyres, a jerry can holder, or a lift jack.
Carriers are available with and without stub axles.
Product Specifications
Couplemate™ manufactures Swing Away Hubs from K1040, a high-grade Australian steel. This is the same grade of steel used for stub axles, as seen in the 4WD Swing Away Rear Kits, as this ensures a sturdy and quality product.
The clearance between the hub and stub is 0.02mm and requires greasing before insertion. It is also necessary to thoroughly clean the wheel or tyre carries before welding and powder coating.
The Flangeless Hub is manufactured to suit the following bearing profiles:
The kits contain NSK-branded inner and outer bearing cones, our Australian-made dust caps, and seals.
Image 1. The circled area is an example of a swingaway used as a Spare Wheel Carrier.
Weight & Load Ratings
The loading rate depends on the length of swing-away you intend to use. The longer the arm, the more loading on the bearings.
Couplemate™ recommends using a 45mm Slimline or 45mm Parallel model due to the added load caused by the fulcrum effect on the rear bar.
The 4WD swing-away spare wheel carrier may need to be replaced if the weight exceeds the bearing limitations. This results in assembly collapse, and if such, replace it with the non-bearing type carrier.
39mm Round Stub Holden Bearings
- Inner ID 31.75mm, OD 59.10mm
- Outer ID 19.05mm, OD 45.20mm
- Seal ID 37.5mm, OD 59.10mm
- Grease Cap 45.20mm
- 55mm OD HUB KIT
45mm Round Stub Ford Bearings
- Inner ID 35.00mm, OD 59.10mm
- Outer ID 22.00mm, OD 45.20mm
- Seal ID 43.9mm, OD 59.10mm
- Grease Cap 45.20mm
- 55mm OD HUB KIT
45mm Round Stub Parallel Bearings
- Inner ID 35.00mm, OD 59.10mm
- Outer ID 35.00mm, OD 59.10mm
- Seal ID 43.9mm, OD 59.10mm
- Grease Cap 63.00mm
45mm Square Stub Axle Ford Bearings
- Inner ID 35.00mm, OD 59.10mm
- Outer ID 22.00mm, OD 45.20mm
- Seal ID 43.9mm, OD 59.10mm
- Grease Cap 45.20mm
- 55mm OD HUB KIT
45mm Square Stud Axle Parallel Bearings
- Inner ID 35.00mm, OD 59.10mm
- Outer ID 35.00mm, OD 59.10mm
- Seal ID 43.9mm, OD 59.10mm
- Grease Cap 63.00mm
50mm Square Stub Axle Ford Bearings
- Inner ID 35.00mm, OD 59.10mm
- Outer ID 22.00mm, OD 45.20mm
- Seal ID 43.9mm, OD 59.10mm
- Grease Cap 45.20mm
- 55mm OD Hub Kit
Purchase more spare wheel carriers here
- 39mm Round Spare Wheel Carrier
- 45mm Round Spare Wheel Carrier
- 45mm Round Spare Wheel Carrier – Parallel
- 50mm Square Spare Wheel Carrier
- 45mm Square Spare Wheel Carrier
- 45mm Square Spare Wheel Carrier – Parallel
- Spare Wheel LM Hub Rescue Kit
- Spare Wheel Slimline Hub Rescue Kit
- Caravan and Boat Rear Wheel Carrier
- Galvanised Spare Wheel Carrier Rescue Kit
Additional information
Weight | 7 kg |
---|---|
Dimensions | 28 × 26 × 7 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Reviews