Pintle Tow Ball Protector – Aftermarket Pintle Hooks
Price
$44.50 Inc.GST
Why should you get a Pintle Tow Ball Protector? 
✓ Minimises abrupt jerking motion of your trailer.
✓ Increases tow ball lifespan.
✓ Reduces noise.
Designed and manufactured by Couplemate™ Australia.
Shipping
Pintle Tow Ball Protector | Australian-Made
The Pintle Tow Ball Protector is a Aftermarket 50mm Combination Pintle Hooks Tow Balls safety device.
The ball protector acts as a cushion or dampener to remove most of the impact of towing equipment during acceleration—no more broken tow balls.
The gap between ring coupling and tow ball can vary by up to 30mm between pintle hook brands. As a result, forces occurring during acceleration from a stationary position cause damage to the tow ball.
How Does the Protector Work?
The ball protector has two parts:
- Inner band: wraps around the tow ball
- Outer sleeve: locks in the inner band
This gives the tow ball extra strength to avoid premature damage during use.
Because the tow ball protector endures the brunt of the towing forces, eventually, it may need to be replaced. However, this extends your tow ball’s life, minimises the trailer’s abrupt jerking motion, and reduces noise.
Couplemate™ has two tow ball protectors on offer. So, how do you know which one you need?
For Aftermarket Pintle Hooks
If you have an aftermarket Pintle Hook, you will likely want the black and yellow cover (CM509). This suits tow balls with a 1 ¼’’ shank.
In this instance, you must measure the distance from the tow ball mount to the horn lip. The Outer Sleeve is 64mm long, so you will want to ensure enough clearance.
75mm Ring Couplings have a ring diameter of 41mm. The gap between the ring and the tow ball often exceeds 20mm. Measure the cavity’s distance between the coupling’s rear and the ball’s back.
If you have a genuine Couplemate Pintle Hook, you want the CM508 protector.
Using the Tow Ball Protector
Ensure that the pintle hook horn is closed when not in use. Vibration from the road can cause the polyurethane ring to move upwards and dislodge.
Additional information
| Weight | 0.1 kg |
|---|---|
| Dimensions | 6 × 6 × 6 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Related products
-
50.0t Pintle Hook and Booster – 2060115
$330.00 – $1,200.00 Inc.GST Options This product has multiple variants. The options may be chosen on the product page -
Genuine CM Pintle Tow Ball Protector Bush
$44.50 Inc.GST Add to cart -
36.4kN Anti-Rattle Pintle Tow Bar Receiver Kit
Original price was: $274.95.$260.00Current price is: $260.00. Inc.GST Add to cart -
Pintle Hook Tow Bar Adaptor – 60kN
$230.00 Inc.GST Add to cart
1 review for Pintle Tow Ball Protector - Aftermarket Pintle Hooks